Welcome: Fujian Jiupo Biotechnology Co., Ltd.
中文 | EN

1600L Mould Cultivation Chamber - MCC1600

Temp. Range: -10℃ to 70℃
Temp. Sensor: Equipped with WAISALA HMP60
Programmable Interactive Control system with 7" Touch Screen
Equipped with smart phone APP remote control system
Layers: 8 (modular shelves)
Growing Volume: 1640L
Interior Dimension (W×D×H): 1568x581x1800mm
Exterior Dimension (W×D×H): 2254x823x2010mm


Mould Cultivation Chamber

Product Overview / Applications

Mould cultivation chamber is a special test equipment for eukaryotic microorganism such as mould cultivation, it is because most of the mold is suitable for growth under the room temperature (25℃), and for the solid substrate culture needs to keep a certain humidity, so the general mould cultivation chamber must be equipped with cooling system, heating system, air humidifier and the pure, control circuit, operation system and other parts. Temperature and humidity sensors are used to maintain stability temperature and humidity in the culture chamber. Some special mould cultivation chamber can also set variational temperature and humidity along the cultivation time goes on. The temperature and humidity of mould cultivation chamber are adjustable, and the temperature and humidity in the chamber are kept stable for a long time with the isolation and insulation technology. It is able continuously running for 7*24 hours, the lifetime of its running can reach more than five years.


Product Details


Air Flow

Airflow for this chamber is distributed uniformly outward from both sides of the walls and back through the air pump on back side of the cabinet, which using JIUPO innovative horizontal-air-refresh distribution plenum. Airflow is sufficient to ensure uniformity as well as proper gas exchange at the leaf surface. Fresh air intake can be adjustable which also helps to ensure adequate ambient gas exchange.


•  Self-contained air-cooled condensing unit with hot air bypass system for continuous compressor operation, extended life and close temperature control. An electronic modulating valve provides tight temperature control while ensuring quiet operation. Pressure transducers are included for monitoring the status of the refrigeration system.

•  Solenoid valves have extended stem for quiet and long-life operation.

•  Rear chamber wall mounted evaporator coil incorporates an air circulation fan.


Safety Limit Controls

•  Adjustable high and low temperature / pressure controls, audible alarms, and visual indicators display on the screen.

•  Controls shut down all power to the chamber, activating alarms (when the temperature / pressure returns to the normal range, the system will automatically reset).

•  Backup “high / low” alarms provide a further level of protection while visual and audible notification is provided when any alarm be activated. Contacts for connection to a remote management system are also included.

Key Product Attributes

•  Certifications: ISO9001:2015, CE, RoHS

MCC1600 | with Expended Temperature and Humidity Range

The JIUPO MCC1600 ensures absolutely constant test conditions throughout the testing area. A big advantage of this constant climate chamber is tis low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make his constant climate chamber ideally suited for stress testing series.


Main Features

   Temperature range: -10°C to +70°C

   Temperature regulation with resistive temperature sensor

   JIUPO Multi Management Software JPCS19V4 Basic Edition

   Equipped with smart phone APP remote control system

   Equipped with fresh air system

   LCD to display temperature along with additional information and alarms

   Independent temperature safety device with visual and audible temperature alarm

   Easily operate with reliable regulating system which works in tandem with an HMI (Human-Machine Interface) consisting of a touchscreen display

   Intuitive touchscreen controller with time-segment and real-time programming

   Internal data logger, measured values can be read out in open format via USB

   Flush-mounted door design for better air impermeability, dual doors designed

   The chamber made of completely stainless steel (SUS304) inner parts and spraying carbon steel body shell

   Equipped with 4 stable castors and two with brakes, moveable to anywhere

Technical Specifications

Model No.MCC
   Exterior Dimensions W×D×H [mm]     Customization  
Interior Dimensions W×D×H [mm]Customization
Capacity [L]300 to 2000
Lighting Shelf1 to 8
Growth Height [cm]20 to 230
Growth Area [㎡]1 to 8
Temperature Range [℃]-10 to 70
Temperature Precision [℃]0.1
Temperature Fluctuation [±K]0.5℃
Temperature Uniformity [±K]2.0℃
Observation WindowOptional
Air Flow with Bottom OutletOptional


Company Profile

We are a professional manufacturer working on environmental-simulation products for agriculture science and life science since 2011. A powerful team we have which working for environmental controlled research, development and production, we serve clients worldwide mainly from the areas of North America, Europe and Asia etc.

Our main products are environmental controlled rooms, plant growth chamber, movable plant growth lighting solutions which range from standard style to highly configured style and customized solutions. We are never stop our steps moving forward to make us to be one of leading supplier in the world for science research and agriculture production.

Over 10 years we have worked on control system based on high technology, different LED spectrum solutions using for specific plant research, good feedbacks always got, all of these inspire us JIUPO a powerful supplier for over 250 clients worldwide.





250+ Organizations600+ Cases Climate Rooms40+ National-patented Certificates50+ Intellectual Properties